Informationen på denna sida är på Engelska, Svensk version av sidan är ej tillgänglig...
Will get you started faster! 
The PLM-24 DevBoard is intended to be used with our PLM-24 Power Line Modem and will get your
application up and running in a shorter time since it includes the AC coupling network, complete power
supply and a large prototyping area for your own applications. The PCB is designed to fit in a standard
plastic case available from several different manufacturers with or without AC plugs according to the
standards of different countries.
The development board also have a multi feature connector for direct interface with standard SSR's (Solid
State Relay) available from several manufacturers or you can use this connector to interface with your own
triac circuit. A list of suitable SSR's is included in the manual.
PLM-24 DevBoard Kit.
We offer a complete kit that includes everything you need to build the PLM-24 DevBoard. Note thatPLM-24 Power Line Modem is not included and must be ordered separately!
The PLM-24 DevBoard Kit includes a professional made double-sided, plated through, solder masked
and silk screened printed circuit board. All required components, printed manual that contains assembling
instructions, part list, complete schematics along with listings of recommended SSR's and plastic case
manufacturers.
Picture shows the PLM-24 module mounted on the DevBoard.
Features.
Directly interfaces with PLM-24 Power Line Modem.
PCB designed to fit directly in a standard plastic case.
Multi feature connector for direct interface with standard SSR's.
Secondary AC voltage available in the prototype area (for zero crossing detector). Large prototyping area 50 x 45 mm (approx. 400 holes). PCB 110 x 57 mm (4.3 x 2.3 inch). Regulated +5 V and +10 V power supply @ 250 mA for PLM-24 and your circuit. Provides screw terminal for AC in and AC out. Available in 230 VAC/50 Hz and 110 VAC/60 Hz versions. [ Back to main page | Prices and how to order | PLM News mailing list | Frequently Asked Questions ]
Copyright © 2000-2001 by HTH All rights reserved. PLM-24 are a trademark of HTH. Other brands
and product names are trademarks or registered trademarks of their respective holders.
This page was last updated 010606 and accessed times - webmaster@hth.com